IS200TTURH1CFD
Overview
IS200TTURH1CFD is a conformal-coated turbine termination board (TTUR) for GE Vernova Speedtronic Mark VIe turbine control and safety systems. It acts as the field wiring interface for PTUR turbine processor packs, handling magnetic pickup speed signals, rotor eccentricity, casing expansion LVDT inputs and primary overspeed trip relay circuits. It supports both simplex and TMR triple modular redundant turbine protection configurations and is a critical safety spare for gas and steam turbine governor and overspeed protection racks.
Core Technical Specifications
| Item | Specification |
|---|---|
| Part Number | IS200TTURH1CFD |
| Manufacturer | GE Vernova (General Electric) |
| Module Type | Turbine Terminal Board (TTUR) |
| Platform | Speedtronic Mark VIe |
| PCB Treatment | Full conformal coating |
| Terminals | 48-point screw terminal blocks |
| Onboard Components | Integrated trip/synchronization relays |
| Signal Types | MPU speed pickup, proximity eccentricity, LVDT casing expansion, discrete trip |
| Connectors | Multiple D-Sub connectors for mating with PTUR I/O packs |
| Configuration | Jumper selectable for simplex / TMR mode |
| Operating Temperature | -30 ℃ ~ +65 ℃ |
| Storage Temperature | -40 ℃ ~ +85 ℃ |
| Relative Humidity | 5% ~ 95% non-condensing |
| Weight | Approx. 0.9 kg |
| Mounting | Standard Mark VIe rack slot |
| Compliance | CE |
| Country of Origin | USA |
Key Features & Benefits
- Conformal coated PCB provides protection against moisture, dust and corrosive cabinet atmospheres
- Dedicated termination and signal conditioning for turbine speed, eccentricity and thermal expansion sensors
- Onboard safety relays for hardwired overspeed trip and generator synchronizing logic
- Hardware jumper setting to adapt simplex or TMR redundant safety architecture
- D-Sub interconnection to PTUR processor packs for IONet communication with Mark VIe controllers
- Supports wire-break detection and sensor health diagnostics via ToolboxST
- Deterministic hardwired trip path independent of software for turbine overspeed protection
- Standard form factor for direct drop-in replacement in legacy Mark VIe turbine cabinets
Typical Applications
- Gas turbine Mark VIe governor and overspeed protection
- Steam turbine speed control and rotor eccentricity monitoring
- Combined cycle power plant turbine control retrofit & maintenance
- Generator synchronizing and primary turbine trip circuits
- Oil & gas mechanical drive turbine control systems
Related / Reference Models
- IS200TTURH1CEC (alternate revision)
- IS200PTURH1A (PTUR processor pack paired with TTUR board)
- IS200VVIBH1C (vibration terminal board for Mark VIe)




