IS200TTURH1C
Overview
IS200TTURH1C is the base turbine termination board (TTUR) for GE Vernova Speedtronic Mark VI / Mark VIe turbine control systems. It is the uncoated base revision of the TTUR family, used to interface PTUR processor packs with field sensors and hardwired overspeed trip circuits. It acquires magnetic pickup speed signals, LVDT casing expansion, rotor eccentricity and discrete trip signals, supporting both simplex and TMR redundant turbine protection architectures. IS200TTURH1CFD is its conformal-coated variant for corrosive cabinet environments.
Core Technical Specifications
| Item | Specification |
|---|---|
| Part Number | IS200TTURH1C |
| Manufacturer | GE Vernova (General Electric) |
| Module Type | Turbine Termination Board (TTUR) |
| Platform | Speedtronic Mark VI / Mark VIe |
| PCB Treatment | Standard bare PCB (without conformal coating) |
| Termination | Screw terminal blocks + multiple D-Sub connectors |
| Onboard Hardware | Integrated trip & synchronizing relays |
| Supported Signals | MPU speed pickup, LVDT, proximity, discrete trip inputs |
| Configuration | Jumper selectable for simplex / TMR mode |
| Power Supply | 24 V DC |
| Operating Temperature | -30 ℃ ~ +65 ℃ |
| Storage Temperature | -40 ℃ ~ +85 ℃ |
| Relative Humidity | 5% ~ 95% non-condensing |
| Net Weight | Approx. 0.9 kg |
| Mounting | Standard Mark VI / Mark VIe rack slot |
| Compliance | CE |
| Country of Origin | USA |
Key Features & Benefits
- Base TTUR hardware for turbine speed measurement and overspeed protection wiring
- Hardwired relay trip path independent of software for critical turbine safety
- Jumper configurable to match simplex or TMR voting architecture
- D-Sub interconnection to PTUR I/O packs for IONet communication
- Sensor break detection and health diagnostics supported via ToolboxST
- Direct pin-compatible with conformal-coated IS200TTURH1CFD
- Standard rack form factor for drop-in replacement in dry, clean control cabinets
- Cost-effective spare for indoor, low-humidity turbine control rooms
Typical Applications
- Gas turbine Mark VI / Mark VIe governor and overspeed protection
- Steam turbine speed and eccentricity monitoring
- Combined cycle power plant turbine control maintenance
- Generator synchronizing and hardwired trip circuits
- Mechanical drive turbine control for oil & gas
Related / Reference Models
- IS200TTURH1CFD: Conformal coated version (for humid / corrosive cabinet)
- IS200TTURH1CEC: Alternate coated revision
- IS200PTURH1A: Matching PTUR processor pack
- IS200VVIBH1C: Vibration termination board
FAQ
- Is IS200TTURH1C still in production? It is a legacy Speedtronic board. New original stock is limited; available supply is new surplus or fully tested refurbished. Lead time needs stock confirmation.
- What is the main difference between IS200TTURH1C and IS200TTURH1CFD? Electrical circuit and pinout are identical. IS200TTURH1C = no conformal coating; IS200TTURH1CFD = conformal coated. CFD is selected for sites with moisture, dust or corrosive atmosphere.
- Can I replace IS200TTURH1CFD with ? Hardware swap is possible without program change, but not recommended if the cabinet environment requires coating.




