MOOG G771K208A G771 Series Nozzle‑Flapper Servo Valve, Steam Turbine DEH Actuator Control Valve, Ready Stock
Product Overview
The G771K208A is a two-stage electro-hydraulic servo valve within the MOOG G771 family. It adopts classic dry torque motor and nozzle-flapper pilot structure, converting analog electrical command signal into proportional hydraulic flow output to drive hydraulic actuators. This model is widely deployed in steam turbine DEH governing systems for control valve, stop valve and throttle actuator closed-loop position regulation. It features fast dynamic response, low hysteresis and high repeatability, built for continuous heavy-duty operation in power generation EH oil systems.
Note: This part is end-of-life, official drop-in replacement: G771K298A
Technical Parameters
| Item | Specification |
|---|---|
| Part Number | G771K208A |
| Manufacturer | MOOG |
| Product Type | Two‑Stage Nozzle‑Flapper Electro‑Hydraulic Servo Valve |
| Series | G771 |
| Rated Flow (ΔP=70 bar) | 80 L/min |
| Max Operating Pressure | 210 bar (3000 psi) |
| Input Signal | ±10 V DC |
| Frequency Response (-90° phase) | ≥160 Hz |
| Step Response Time | ~6 ms (0–100%) |
| Linearity | ≤ ±1% FS |
| Hysteresis | ≤ ±0.5% FS |
| Pilot Stage | Nozzle‑flapper, dry torque motor |
| Mounting Standard | ISO 10372 |
| Compatible Fluid | Mineral hydraulic oil / phosphate ester (depends on seal kit) |
| Fluid Temperature Range | -20 °C ~ +80 °C |
| Storage Temperature | -40 °C ~ +100 °C |
| Net Weight | Approx. 3.3 kg |
| Country of Origin | United States |
| Cross Reference Replacement | G771K298A |
| Condition | Original genuine, available in stock |
Brand History & Introduction (MOOG G771 Lineage)
MOOG established the global benchmark for high-performance servo valves since 1951. The nozzle-flapper two-stage servo valve architecture has become the preferred solution for power turbine governing, aerospace simulation and material test systems.
The G771 series was developed as an industrial optimized platform targeting power plant DEH hydraulic actuators, complementing the well-known G761 series. Compared with G761, G771 is optimized for long-term continuous 24/7 operation under power station EH oil environments.
G771K208A is the higher-flow variant in this lineup, selected for large-size turbine actuators that demand larger hydraulic flow to achieve fast valve stroke movement. As MOOG discontinued the K208A version, G771K298A was released as the direct replacement with identical mounting pattern, flow rating, signal interface and performance curve, no actuator modification required for retrofit.
Large coal-fired and combined-cycle steam turbines around the world still use this servo valve in their hydraulic governing packages, making G771K208A a critical emergency spare during unit overhaul and unplanned outages.
Key Advantages
- High rated flow for large-bore turbine hydraulic actuators
- Dry torque motor design, low thermal drift and stable zero point
- Excellent linearity and low hysteresis for precise valve position control
- Standard ISO mounting interface for easy field swap
- Field-proven design for phosphate ester EH fluid in turbine DEH systems
- Direct interchangeable substitute model: G771K298A
Typical Applications
- Steam turbine DEH governing actuator (large flow demand)
- Turbine throttle valve, governor valve and stop valve control
- Combined-cycle power generation hydraulic control systems
- Heavy-duty hydraulic closed-loop force / position test rigs
- Industrial hydraulic simulation benches
FAQ Snippet
Q: Is G771K208A obsolete? A: Yes, original production stopped. G771K298A is MOOG’s official equivalent replacement.
Q: What is the main difference between G771K202A and ? A: Rated flow. G771K202A is 20 L/min; is 80 L/min. They cannot replace each other directly.
Q: What is the most common failure cause for this servo valve? A: Oil contamination. Strict filtration of EH fluid is mandatory to avoid nozzle blockage and zero drift.




