G771K202A | MOOG Two‑Stage Electro‑Hydraulic Servo Valve, In Stock
Brand Title
MOOG G771K202A G771 Series Nozzle‑Flapper Servo Valve, Turbine DEH Actuator Control Valve, Ready Stock
Product Overview
The G771K202A is a two‑stage electro‑hydraulic flow control servo valve from MOOG G771 product family. It adopts dry torque motor plus nozzle‑flapper pilot architecture, converting analog electrical command signal into proportional hydraulic flow output to drive hydraulic actuators. Widely used on steam turbine DEH governing actuators for throttle valve and governor valve position control. It delivers ultra‑fast response, low hysteresis and high resolution for closed‑loop turbine governing, also adopted in high‑speed test benches and precision force/position control systems.
Technical Parameters
| Item | Specification |
|---|---|
| Part Number | G771K202A |
| Manufacturer | MOOG |
| Product Type | Two‑Stage Nozzle‑Flapper Electro‑Hydraulic Servo Valve |
| Series | G771 |
| Rated Flow (ΔP=70 bar) | 20 L/min |
| Max Operating Pressure | 210 bar (3000 psi) |
| Input Signal | ±10 V DC |
| Frequency Response (-90° phase) | ≥ 200 Hz |
| Step Response Time | ~4 ms (0–100%) |
| Linearity | ≤ ±1% FS |
| Hysteresis | ≤ ±0.5% FS |
| Pilot Stage | Nozzle‑flapper, dry torque motor |
| Mounting Standard | ISO 10372 |
| Fluid Media | Mineral hydraulic oil / phosphate ester (seal option dependent) |
| Fluid Temperature Range | -20 °C ~ +80 °C |
| Storage Temperature | -40 °C ~ +100 °C |
| Net Weight | Approx. 3.0 kg |
| Country of Origin | United States |
| Cross Reference | G771K293A |
| Condition | Original genuine, available in stock |
Brand History & Introduction (MOOG G771 Lineage)
MOOG has been the global benchmark of high‑performance servo valve technology since 1951. Its nozzle‑flapper two‑stage servo valves became the mainstream choice for aerospace, test equipment and power turbine governing applications.
The G771 series was developed as a cost‑effective high‑dynamic servo valve platform targeting industrial heavy‑duty closed‑loop control, especially turbine DEH governing systems. Before the G771 family, power plant DEH actuators mostly relied on older G761 series, which had higher cost and longer lead times. The shared the proven torque motor pilot principle while optimizing the spool structure for continuous 24/7 power plant operation.
G771K202A quickly became a standard OEM valve for many steam turbine governing actuator packages. As MOOG phased out this variant, G771K293A was released as its direct drop‑in replacement with identical mounting, flow rating and control characteristics. Thousands of steam turbine assets worldwide still run with this valve, making G771K202A a critical emergency spare for power plant outages.
Key Advantages
- High dynamic response, suitable for fast turbine load regulation
- Dry torque motor design, low drift and long service life
- Low hysteresis & excellent linearity, stable valve position control
- Standard ISO mounting interface, easy retrofit on existing DEH actuators
- Mature field‑proven design for continuous power generation service
- Direct interchangeable replacement: G771K293A
Typical Applications
- Steam turbine DEH governing actuator control
- Combined-cycle turbine control valve positioning
- Material test & fatigue test benches
- High‑precision hydraulic position / force closed‑loop control
- Aerospace ground simulation test rigs
FAQ Snippet
A: Yes, original production discontinued. G771K293A is the official substitute with same performance and footprint.
Q: Can it work directly with GE / Siemens DEH actuator? A: Yes, it is a common OEM match for standard steam turbine hydraulic actuators, subject to flow and pressure requirement verification.
Q: What maintenance is required? A: Requires clean EH hydraulic oil with strict filtration; contamination is the top cause of pilot blockage and valve drift.




