PTQ-PDPMV1 ProSoft Technology PROFIBUS DPV1 Master Module

  1. Full DPV1 functional support: Enables acyclic read/write, parameter download and field device diagnosis beyond basic cyclic DP I/O.
  2. High slave capacity: Handles up to 125 DP slaves on one bus segment for dense fieldbus architectures.
  3. Hot standby failover: Designed for SIL-adjacent continuous process lines, fast switchover for zero-loss critical control.
  4. FDT/DTM integration: Native compatibility with PACTware and other asset management platforms for instrument maintenance.
  5. Backplane optimisation: Asynchronous data exchange with Quantum CPU, avoiding main processor load from bus polling.
  6. Rich diagnostic visibility: Local LED status, web-based monitoring and detailed fault logs to shorten site troubleshooting.
  7. Broad interoperability: Works with third-party DP slaves including drives, remote I/O, flow meters, level transmitters and valve positioners.
Category: SKU: PTQ-PDPMV1 DPV1 Brand:

Description

PTQ-PDPMV1 ProSoft Technology PROFIBUS DPV1 Master Module

 

Product Introduction

The PTQ-PDPMV1 is a high-performance PROFIBUS DPV1 master communication processor engineered by ProSoft Technology for the Schneider Quantum / Unity PLC rack platform. Licensed under Schneider’s backplane specification, it acts as a dedicated protocol gateway, bridging the Quantum backplane and PROFIBUS DP fieldbus to enable cyclic I/O exchange plus acyclic DPV1 parameter access to intelligent field instruments, variable speed drives, remote I/O and transmitters complying with IEC 61158 standardProSoft Te….

It operates as an intelligent rack-mounted co-processor, offloading PROFIBUS stack processing from the main Quantum CPU. The module supports both DP-V0 cyclic data and DP-V1 Class 1 / Class 2 acyclic services, supporting device parameterisation, diagnosis and asset management via FDT/DTM tools. Hot standby redundancy is available for critical process installations, allowing dual Quantum CPU control with fast failover below 300ms to minimise process outage riskProSoft Te…. Configuration is handled through ProSoft Configuration Builder (PCB) and PROFIBUS comDTM, with on-board web server and LED status indicators for local commissioning and troubleshooting.

PTQ-PDPMV1

Key Technical Specifications

Item Specification
Part Number PTQ-PDPMV1
Manufacturer ProSoft Technology
Host Platform Schneider Quantum / Unity PLC rack
Protocol PROFIBUS DP-V0 / DP-V1 Master (IEC 61158)
Max Slave Count Up to 125 PROFIBUS DP slaves
PROFIBUS Interface RS485, 9-pin D-SUB
Supported Baud Rates 9.6 kbps ~ 12 Mbps
Redundancy Option Hot Standby (Dual Quantum CPU failover)
Configuration Tools ProSoft Configuration Builder (PCB), PROFIBUS comDTM, embedded web server
Diagnostic 4-digit alphanumeric LED, extended slave alarm & channel diagnostics
Firmware Flash-upgradable
Power Supply 5 VDC from Quantum backplane
Operating Temperature 0 °C to +60 °C
Certification CE, UL, ATEX (Ex nL IIC T4)
Protection Class IP20 (for rack installation)
Architecture ASPC2 Step E ASIC + Infineon C165 microcontroller

 

Main Features & Advantages

  1. Full DPV1 functional support: Enables acyclic read/write, parameter download and field device diagnosis beyond basic cyclic DP I/O.
  2. High slave capacity: Handles up to 125 DP slaves on one bus segment for dense fieldbus architectures.
  3. Hot standby failover: Designed for SIL-adjacent continuous process lines, fast switchover for zero-loss critical control.
  4. FDT/DTM integration: Native compatibility with PACTware and other asset management platforms for instrument maintenance.
  5. Backplane optimisation: Asynchronous data exchange with Quantum CPU, avoiding main processor load from bus polling.
  6. Rich diagnostic visibility: Local LED status, web-based monitoring and detailed fault logs to shorten site troubleshooting.
  7. Broad interoperability: Works with third-party DP slaves including drives, remote I/O, flow meters, level transmitters and valve positioners.

 

Product History & Lifecycle

The PTQ-PDPMV1 was released as ProSoft’s flagship PROFIBUS master interface for the Schneider Quantum platform, developed to fill the demand for DPV1-capable fieldbus connectivity on legacy Quantum/Unity systems. Its core hardware design leverages the proven Siemens ASPC2 PROFIBUS ASIC, widely adopted in industrial DP master products of that era.

A major functional upgrade introducing Hot Standby redundancy and full FDT/DTM support was rolled out around 2012, expanding its suitability for oil & gas, power, pulp & paper and continuous chemical processes where downtime cannot be toleratedProSoft Te….

While Schneider has migrated newer projects to EcoStruxure and PROFINET-focused architectures, the PTQ-PDPMV1 remains an active spare and retrofit item for the enormous global installed base of Quantum PLC systems. It is not recommended for new greenfield designs, and is primarily supplied for replacement, migration bridging and lifecycle support of existing PROFIBUS DP-V1 networks. Its direct counterpart for Rockwell ControlLogix is the MVI56-PDPMV1.

 

Typical Applications

  • Oil & gas: compressor controls, pipeline instrumentation, offshore skid automation
  • Power & utilities: boiler fans, feedwater pumps, turbine auxiliary I/O
  • Chemical & petrochemical: continuous process transmitters, control valves, local skids
  • Metals & mining: conveyor drives, rolling mill auxiliary fieldbus
  • Water & wastewater: flow analysers, level instruments, actuator networks

 

Cross Reference

  • MVI56-PDPMV1: PROFIBUS DPV1 Master for Rockwell ControlLogix
  • PTQ-PDPS: PROFIBUS DP Slave module for Quantum/Unity