MINITRANS Hi-pot Portable Dielectric Withstand Hipot Test Transformer

  1. MINITRANS 10kV Hipot Transformer
  2. MINITRANS 30kV Hipot Transformer
  3. MINITRANS 50kV Hipot Transformer
  4. MINITRANS Control Console Unit
  5. VLF-30 Very Low Frequency Hipot Tester
  6. VLF-60 Cable Hipot Test Set
  7. DC Hipot 60kV High Voltage Generator
  8. Tan Delta / Capacitance Test Kit
  9. TTR Transformer Turns Ratio Tester
  10. PD Partial Discharge Detector
Category: SKU: MINITRANS Brand:

Description

MINITRANS Hi-pot Portable Dielectric Withstand Hipot Test Transformer

 

Product Introduction

The MINITRANS Hi-pot is a compact, lightweight high-voltage test transformer dedicated for dielectric withstand (hipot) testing, widely used for routine maintenance and field commissioning of electrical assets. This dry-type mini test transformer integrates high-voltage winding, insulation structure and safety interlock in a portable enclosure, delivering stable AC high voltage for insulation strength verification. It adopts low partial discharge design and built-in over-current, over-voltage protection. Equipped with HV output terminal, ground terminal and safety interlock circuit, it cuts off high voltage immediately once the safety cover opens. Paired with a matching control console, users can ramp test voltage smoothly, hold test duration and monitor leakage current. Its small footprint makes it ideal for site work in tight cabinet rooms, substations and workshop quality inspection. It is a classic legacy HV test unit for electrical contractors and asset maintenance teams.

MINITRANS Hi-pot

Specification Parameters

Item Specification
Model MINITRANS Hi-pot
Type Dry-type AC Hipot Test Transformer
Rated Input 220V AC, 50/60Hz
Test Output AC high voltage (standard variants: 10kV / 30kV / 50kV)
Rated Capacity 2kVA / 3kVA / 5kVA optional
Cooling Natural air cooling
Insulation Epoxy resin cast dry insulation
Protection Over-current trip, safety interlock, ground fault protection
Partial Discharge Low PD design for sensitive insulation test
Form Portable split type: HV transformer unit + control box
Operating Temperature -10 °C ~ +50 °C
Humidity ≤85% non-condensing
Certifications IEC 60060, CE
Weight Lightweight, approx. 12–35kg depends on voltage grade

 

Application Scenarios

  • On-site hipot test for MV/LV power cables
  • Insulation withstand test of motors, transformers and reactors
  • Switchgear, busbar and cabinet factory & site acceptance test
  • UPS, battery cabinet and low-voltage panel insulation inspection
  • Repair & maintenance test for offshore and industrial electrical equipment
  • Laboratory dielectric strength verification for electrical components
  • Field commissioning for renewable power station electrical equipment
  • Legacy power system retrofit and periodic preventive maintenance

 

Recommended 10 Related Models

  1. MINITRANS 10kV Hipot Transformer
  2. MINITRANS 30kV Hipot Transformer
  3. MINITRANS 50kV Hipot Transformer
  4. MINITRANS Control Console Unit
  5. VLF-30 Very Low Frequency Hipot Tester
  6. VLF-60 Cable Hipot Test Set
  7. DC Hipot 60kV High Voltage Generator
  8. Tan Delta / Capacitance Test Kit
  9. TTR Transformer Turns Ratio Tester
  10. PD Partial Discharge Detector

 

FAQ

Q1: Is MINITRANS Hi-pot AC only? A1: Standard MINITRANS Hi-pot is AC dry-type hipot transformer for AC withstand test. DC output version is available as separate variant upon request.

Q2: Does it come with control box? A2: Normally sold as split set: high-voltage transformer body + control console. Voltage regulation, timing and leakage reading are all operated from the control unit.

Q3: Is MINITRANS Hi-pot still in active production? A3: It is an older legacy portable hipot transformer series. Available stock is mostly surplus or calibrated refurbished units for field maintenance replacement.

Q4: What safety precautions are mandatory during hipot testing? A4: Secure safety fencing, warning signs, reliable earthing connection and interlock check. Discharge the DUT fully after test; residual charge can cause severe electric shock.

Q5: Can it test long power cables? A5: It supports cable AC hipot test, but verify test current and capacity. Long cables have large capacitance current, which may exceed the transformer rated capacity.

Q6: Can this unit perform tan delta or insulation resistance test? A6: No. It only provides dielectric withstand hipot voltage. Megger / IR tester and tan delta test sets are separate instruments.