ELAU MC-4/11/10/400 PacDrive Digital Servo Drive, 10A Continuous, SERCOS Fiber Motion Interface

  1. ELAU MC-4/11/03/400 Servo Drive
  2. ELAU MC-4/11/05/400 Servo Drive
  3. ELAU MC-4/11/22/400 Servo Drive
  4. ELAU MC-4/11/50/400 Servo Drive
  5. ELAU SM-070 Servo Motor
  6. ELAU SM-100 Servo Motor
  7. ELAU SM-140 Servo Motor
  8. ELAU SR-070 Servo Motor
  9. ELAU PacDrive C400 Motion Controller
  10. ELAU PacDrive C600 Motion Controller
  11. ELAU PAS Programming Software Kit
  12. ELAU SERCOS Fiber Cable
  13. ELAU Brake Resistor
  14. Schneider Lexium LXM62D Servo Drive (Migration replacement)
  15. Schneider Lexium LXM52 Servo Drive
  16. ELAU Encoder Feedback Cable
Category: SKU: ELAU MC-4/11/10/400 Brand:

Description

ELAU MC-4/11/10/400 PacDrive Digital Servo Drive, 10A Continuous, SERCOS Fiber Motion Interface

 

Model & Part Number

  • Type: MC-4/11/10/400
  • Manufacturer: ELAU (Schneider Electric Group, Germany)
  • Product Category: Single-axis Digital Servo Amplifier / Servo Drive
  • Series: PacDrive MC-4
  • Compatible System: PacDrive motion controller, SERCOS fiber real-time bus, ELAU SM / SR series servo motors

MC-4/11/10/400

Product Description

The MC-4/11/10/400 is a compact single-axis digital servo drive within ELAU PacDrive MC‑4 family, designed for high‑speed synchronized motion control. It accepts 3‑phase 400V mains supply and delivers 10A continuous output current, with 25A peak overload capacity for fast dynamic positioning. Communication with the PacDrive master controller runs over fiber‑optic SERCOS interface, which delivers ultra‑low latency and strong immunity against EMI. This drive supports position, speed and torque control modes, with automatic motor recognition via electronic motor nameplate. It is an end‑of‑life legacy motion product, widely stocked as spare parts for packaging, converting and machinery OEM retrofits and life extension projects.

 

Technical Specifications

Item Specification
Mains Input 3×380–480 VAC, ±10%, 48–62 Hz
Control Supply 24 VDC, -15% ~ +25%, max 1 A
Continuous Output Current 10 Arms
Peak Output Current 25 Arms (1 second overload)
Rated Apparent Power 6.9 kVA
DC Bus Voltage 530–680 VDC
Integrated Brake Chopper 60 Ω, 100 W continuous
Communication SERCOS fiber optic interface
Feedback Sin/Cos 1Vpp encoder, resolver support
Digital I/O Built‑in programmable fast digital inputs and outputs
PWM Carrier 8 kHz default, adjustable
Operating Temperature 0°C ~ +55°C
Storage Temperature -20°C ~ +70°C
Relative Humidity 5% ~ 85%, non‑condensing
Protection Class IP20 (cabinet mounting)
Dimension 69 mm × 310 mm × 260 mm
Net Weight Approx. 3.6 kg
Compliance CE, UL

 

Application Fields

  • High-speed packaging machinery
  • Converting, printing and paper processing lines
  • Plastic injection and blow molding equipment
  • Food & beverage automated handling lines
  • Textile machinery and warp knitting machines
  • Gantry, pick-and-place and robotic handling systems
  • Pharmaceutical blister packaging equipment
  • Legacy PacDrive machine overhaul and spare replacement

 

Brand Profile (ELAU PacDrive)

ELAU was a German motion control specialist acquired by Schneider Electric. The PacDrive platform is a well‑known integrated motion control system for packaging and converting machinery, combining centralized motion controllers, fiber SERCOS bus and MC‑4 servo drives. The PacDrive architecture was famous for multi‑axis electronic cam, flying shear and synchronous web control. Schneider has phased out the classic MC‑4 drive range and migrated new projects to Lexium motion platforms, while a huge installed base of packaging machines still depends on MC‑4 spares for production continuity.

 

Related News & Industry Events

MC‑4 series servo drives are discontinued by Schneider/ELAU. Original new stock is limited and supply chain lead times are unstable. Packaging OEMs and end users maintain tested spare MC‑4/11/10/400 units to avoid costly production downtime. Many factories perform machine upgrades during planned shutdowns, replacing the PacDrive system with modern Lexium motion solutions. Tested surplus and refurbished MC‑4 drives remain high‑demand aftermarket items for machinery asset owners.

 

Usage Scenarios

  1. Single-axis servo control for PacDrive multi-axis motion network
  2. Electronic cam, flying cut and synchronized web tension control
  3. High‑speed pick-and-place, carton forming and sealing axis control
  4. Torque‑limited winding / unwinding tension control for film and paper
  5. Direct replacement for failed MC‑4 drive during machine maintenance
  6. New axis addition for existing PacDrive machine expansion
  7. Servo motor drive for rotary knife, feed roller and index table
  8. Real‑time motion coordination with PacDrive master controller via SERCOS fiber bus

 

Functional Advantages

  • Fiber SERCOS real‑time bus: excellent noise immunity, no ground loop disturbance
  • Triple closed‑loop DSP control (current / speed / position) for high dynamic response
  • Automatic motor identification, fast commissioning and parameter setup
  • Three operation modes: position, speed and torque, flexible for different process axes
  • Built‑in brake chopper for regenerative energy absorption during fast deceleration
  • Compact width (69 mm), high axis density inside machine control cabinet
  • Integrated fast digital I/O for cam trigger, sensor capture and safety interlock
  • Proven long‑term reliability on 24/7 packaging production lines
  • Seamless interoperability with original ELAU SM / SR servo motors

 

Recommended Related Products (16 pcs)

  1. ELAU MC-4/11/03/400 Servo Drive
  2. ELAU MC-4/11/05/400 Servo Drive
  3. ELAU MC-4/11/22/400 Servo Drive
  4. ELAU MC-4/11/50/400 Servo Drive
  5. ELAU SM-070 Servo Motor
  6. ELAU SM-100 Servo Motor
  7. ELAU SM-140 Servo Motor
  8. ELAU SR-070 Servo Motor
  9. ELAU PacDrive C400 Motion Controller
  10. ELAU PacDrive C600 Motion Controller
  11. ELAU PAS Programming Software Kit
  12. ELAU SERCOS Fiber Cable
  13. ELAU Brake Resistor
  14. Schneider Lexium LXM62D Servo Drive (Migration replacement)
  15. Schneider Lexium LXM52 Servo Drive
  16. ELAU Encoder Feedback Cable

 

Installation Instruction

  1. Disconnect 3‑phase mains power and 24 VDC control supply before installation.
  2. Mount MC‑4/11/10/400 vertically on DIN rail inside the control cabinet, leave proper ventilation clearance top and bottom.
  3. Wire the 3‑phase 400 VAC mains input, strictly follow L1/L2/L3 marking and torque terminal screws.
  4. Connect 24 VDC control power, observe polarity.
  5. Wire 3‑phase U/V/W motor power cable and sin/cos encoder cable to the drive; use shielded cables and proper grounding.
  6. Insert SERCOS fiber connectors to the optical port, maintain minimum fiber bend radius, avoid sharp bending.
  7. Connect external brake resistor if required for high cyclic deceleration.
  8. Restore power, check power and ready status LEDs.
  9. Connect to PacDrive controller, download motion project via PAS software.
  10. Run auto motor recognition routine, verify encoder direction and motor rotation.
  11. Test single‑axis jogging, positioning, torque mode and cam synchronization.
  12. Run full machine cycle test, check SERCOS communication stability and no alarm triggers.

 

Maintenance Guide

  • Daily Check: Inspect status LEDs, drive housing temperature, cable tightness and dust accumulation. Watch for overheating alarm.
  • Periodic Maintenance: Clean ventilation fins with dry anti‑static brush; do not use liquid cleaner. Inspect fiber connector cleanliness.
  • Routine Test: Backup motion project and motor parameter files during machine shutdown. Test emergency stop and STO safety circuit regularly.
  • Troubleshooting: If overcurrent alarm appears, check motor winding insulation, cable short circuit and mechanical jamming. SERCOS communication loss: inspect fiber breakage, connector dirt or master controller status. Overvoltage alarm: check brake resistor connection and deceleration ramp setting.
  • Spare Handling: Store spare drive in anti‑static bag, cool dry environment, protect fiber optical port with dust cap.
  • Repair Notice: Do not open drive housing or repair power stage on site. Return faulty unit to qualified ELAU/Schneider service vendor for testing.
  • Lifecycle Note: MC‑4/11/10/400 is obsolete PacDrive hardware. Evaluate migration to Lexium motion platform while maintaining spare inventory for production risk control.