1794-IRT8XT | Allen‑Bradley (Rockwell Automation)

Key Features & Advantages

  1. Extended Temperature Ruggedized Design Conformal coating and wide operating temperature range make it suitable for dusty, humid, high‑vibration and fluctuating ambient environments, widely used outside standard climate‑controlled electrical cabinets.
  2. Multi‑Signal Compatibility One single module accepts thermocouple, RTD and millivolt inputs, reducing spare part SKUs and simplifying BOM for mixed temperature measurement points.
  3. High‑Precision 16‑Bit Conversion High resolution ensures fine temperature differentiation, critical for furnace, thermal treatment, refrigeration and reactor temperature monitoring.
  4. RIUP Hot‑Swap Support Modules can be replaced while the backplane remains powered, minimizing system downtime and simplifying on‑site maintenance.
  5. Modular & Distributed I/O Architecture Mix‑and‑match with other FLEX I/O digital, analog and specialty modules; flexible terminal base selection reduces long sensor wiring runs and lowers signal interference risk.
  6. Rich Built‑in Diagnostics Open‑wire detection, range alarm and module fault reporting enable fast troubleshooting inside Rockwell PLC programming environments.
Category: SKU: 1794-IRT8XT Brand:

Description

1794-IRT8XT | Allen‑Bradley (Rockwell Automation)

 

Title

1794-IRT8XT FLEX I/O‑XT 8‑Point Thermocouple / RTD / Millivolt Input Module

1794-IRT8XT

Product Description

The Allen‑Bradley 1794-IRT8XT is an extended‑temperature analog input module within the Bulletin 1794 FLEX I/O‑XT distributed I/O portfolio, designed for accurate temperature measurement and millivolt signal acquisition in demanding industrial environments. It supports 8 non‑isolated input channels compatible with thermocouples, RTDs and low‑level millivolt sensors, delivering 16‑bit high‑resolution conversion for stable temperature and process signal capture. Built with conformal coating and wide temperature tolerance, this XT variant is engineered for extreme cabinet and field conditions where standard FLEX I/O cannot operate reliably. It integrates seamlessly with FLEX I/O terminal bases and communication adapters for ControlNet, DeviceNet, EtherNet/IP and other mainstream industrial networks, offering flexible distributed I/O architecture for process monitoring, thermal control and condition monitoring systems.

 

Technical Specifications

Item Parameter
Catalog Number 1794‑IRT8XT
Series FLEX I/O‑XT
Input Type Thermocouple, RTD, Millivolt (mV)
Channel Count 8 channels, non‑isolated
Resolution 16‑bit
Supply Voltage 24V DC
Operating Temperature Range -20°C ~ +70°C (-4°F ~ +158°F)
Conformal Coating Yes (XT enhanced ruggedization)
Supported Thermocouple Types J, K, T, E, R, S, B, N
Supported RTD Types Pt100, Pt1000, Ni100, Cu10 etc.
Feature RIUP – Removal and Insertion Under Power
Lifecycle Status Active Mature
Certifications CE, UL, CSA

 

Key Features & Advantages

  1. Extended Temperature Ruggedized Design Conformal coating and wide operating temperature range make it suitable for dusty, humid, high‑vibration and fluctuating ambient environments, widely used outside standard climate‑controlled electrical cabinets.
  2. Multi‑Signal Compatibility One single module accepts thermocouple, RTD and millivolt inputs, reducing spare part SKUs and simplifying BOM for mixed temperature measurement points.
  3. High‑Precision 16‑Bit Conversion High resolution ensures fine temperature differentiation, critical for furnace, thermal treatment, refrigeration and reactor temperature monitoring.
  4. RIUP Hot‑Swap Support Modules can be replaced while the backplane remains powered, minimizing system downtime and simplifying on‑site maintenance.
  5. Modular & Distributed I/O Architecture Mix‑and‑match with other FLEX I/O digital, analog and specialty modules; flexible terminal base selection reduces long sensor wiring runs and lowers signal interference risk.
  6. Rich Built‑in Diagnostics Open‑wire detection, range alarm and module fault reporting enable fast troubleshooting inside Rockwell PLC programming environments.

 

Typical Applications

Oil & gas, water treatment, food & beverage, power generation, chemical processing, refrigeration systems, furnace & heat treatment, heavy machinery thermal monitoring.

 

Brand History (Allen‑Bradley / Rockwell Automation)

Allen‑Bradley was founded in 1903 in Milwaukee, USA, focusing originally on motor control components. It grew into one of North America’s most influential industrial automation brands. In 1985, Allen‑Bradley was acquired by Rockwell International. In 2001, the automation division was spun off and renamed Rockwell Automation, with Allen‑Bradley retained as its core hardware brand. For more than 120 years, Allen‑Bradley has developed PLCs, distributed I/O, drives, sensors and safety automation products, establishing a global ecosystem for industrial control. The FLEX I/O platform, launched to deliver low‑cost, flexible distributed I/O, later expanded into the FLEX I/O‑XT ruggedized line for extreme‑location deployment.

 

Related News & Events

Rockwell Automation continuously extends the FLEX I/O‑XT product family to address harsh‑environment measurement demands for process industries. The 1794‑IRT8XT is a mature, long‑term available temperature input module frequently specified in upgrade and retrofit projects for legacy ControlNet and EtherNet/IP systems. Rockwell regularly updates device profiles, EDS files and user manuals for the 1794 series to maintain compatibility with modern Logix controllers and Studio5000 programming software. As many end‑users migrate from older analog racks to distributed FLEX I/O, the 1794‑IRT8XT remains a popular drop‑in choice for temperature I/O renovation.

Short Sales Blurb (for quotation / product list)

1794‑ Allen‑Bradley FLEX I/O‑XT 8‑Channel Thermocouple / RTD / mV Input Module, 16‑bit, -20°C to +70°C, conformal coated, hot‑swappable, ideal for harsh‑area temperature monitoring on Rockwell Logix control platforms.