ULDIOR-20A | UL Group Diode OR-ing Module
Brand Title
UL Group ULDIOR-20A 20A Diode OR-ing Redundant Power Module, Marine Automation Power Redundancy Unit
Product Overview
The ULDIOR-20A, also marked as ULPWDIOR-20, is a heavy-duty diode OR-ing module manufactured by UL Automation Systems (UL Group). It is a dedicated redundancy power board built for dual DC source parallel feeding. The high-power diodes with integrated heat sinks isolate two independent DC power feeds, enabling seamless automatic switchover if one supply fails. It prevents reverse current backflow between power sources and protects downstream marine control, alarm and automation loads from blackout. Widely deployed on vessel power distribution panels, ship automation consoles, UPS and critical DC control circuits.
Technical Parameters
| Item | Specification |
|---|---|
| Part Number | ULDIOR-20A |
| Alternative Code | ULPWDIOR-20 / 20125201 |
| Manufacturer | UL Automation Systems Pvt. Ltd. (UL Group) |
| Product Type | Diode OR-ing Module (Power Redundancy Board) |
| Rated Current | 20 A continuous |
| Power Stage | Dual input, single OR output |
| Semiconductor | High-current stud-mounted power diodes |
| Cooling | Passive aluminium heat sink |
| Mounting | DIN rail mount, green DIN PCB carrier |
| PCB Flame Rating | UL94V-0 |
| Terminals | Screw terminal blocks for DC +/- connections |
| Operating Temperature | 0 °C ~ +70 °C |
| Relative Humidity | 5%–95%, non-condensing |
| Net Weight | Approx. 0.4–0.5 kg |
| Core Feature | Reverse current blocking, hot redundant DC power ORing, no control logic required |
Brand History & Introduction (UL Group Lineage)
UL Group (UL Automation Systems) is an India-based industrial and marine automation component supplier, focusing on rugged power interface, protection and signal conditioning modules for the shipping and offshore sector. Its product portfolio covers diode ORing units, relay modules, isolation converters and alarm interface cards, designed to satisfy marine classification site requirements.
Before dedicated OR-ing modules became common, shipboard redundant DC power relied on discrete diode assemblies with poor thermal design and messy wiring. UL Group launched the DIOR series including ULDIOR-10A, ULDIOR-20A and ULSLDIOR-20A as ready-to-use DIN-rail packaged solutions. The design pre-mounts power diodes on matched heat sinks with clearly labelled dual-input terminals, which greatly simplifies panel builder wiring and reduces on-site assembly risk.
This series quickly became a standard spare for Indian shipyards, marine automation integrators and global ship spare stockists. It is not a programmable control card; it is a passive power protection hardware. Even today, ULDIOR-20A remains a high-demand spare for retrofits and vessel maintenance, because many existing marine DC redundancy panels use this exact footprint.
Key Advantages
- Fully passive design, no auxiliary power, no firmware to configure
- Built-in heat sink handles continuous 20A DC load without extra cooling
- Diode isolation blocks reverse current and protects healthy power sources
- Compact DIN rail form factor for marine control cabinet integration
- Simple wiring with clear dual-input / single-output terminal marking
- Rugged construction adapted for vibration and humidity on board ships
Typical Applications
- Shipboard 24VDC redundant power distribution
- Marine alarm & monitoring system power backup
- Vessel automation console UPS cross-feed circuits
- Offshore skid DC power redundancy
- Industrial critical control DC bus protection
FAQ Snippet
Q: What is the difference between and ULSLDIOR-20A? A: is the standard high-current ORing board with exposed heat sinks; ULSLDIOR-20A is the enclosed transparent cover variant for extra mechanical protection.
Q: Does it perform active switching? A: No. It works by diode forward voltage drop. When one supply voltage drops, the other source automatically supplies the load. It is a passive OR-ing solution, not an active automatic transfer switch.




