IS200TRPGH1B
Overview
IS200TRPGH1B is the TRPG Turbine Primary Trip Terminal Board for GE Vernova Speedtronic Mark VIe safety racks. It acts as the hardwired power and termination interface for emergency trip solenoid circuits, working with PPRO protection packs and TPRO terminal boards to execute the final shutdown path for gas and steam turbines. This board distributes 125 VDC trip solenoid power and carries monitored flame detector wiring, forming a critical safety layer independent of software control. Revision B is pin‑compatible drop‑in upgrade for the older IS200TRPGH1A, with improved relay contact alloy and enhanced coil back‑EMF suppression for longer life under frequent cycling.
Core Technical Specifications
| Item | Specification |
|---|---|
| Part Number | IS200TRPGH1B |
| Manufacturer | GE Vernova (General Electric) |
| Module Type | Primary Trip Terminal Board (TRPG) |
| Platform | Speedtronic Mark VIe |
| Field Circuits | Trip solenoid loops, flame detector supply & return |
| Solenoid Circuit Voltage | 125 V DC |
| Logic Control Supply | 28 V DC |
| Terminal Arrangement | 48-point screw terminal blocks |
| Connectors | D-Sub connectors for interconnection to PPRO / TPRO |
| Surge Protection | Integrated MOV suppression |
| Galvanic Isolation | Isolation between 125 VDC trip side and 28 VDC logic side |
| Operating Temperature | -30 ℃ ~ +65 ℃ |
| Storage Temperature | -40 ℃ ~ +85 ℃ |
| Relative Humidity | 5% ~ 95% non-condensing |
| Net Weight | Approx. 0.77 kg |
| Mounting | Standard Mark VIe rack slot |
| Compliance | CE |
| Country of Origin | USA |
Key Features & Benefits
- Dedicated hardwired trip solenoid termination for turbine emergency shutdown
- Supports flame detector power routing and field wiring monitoring
- Revision B upgraded contact material and coil suppression for reduced arcing and wear
- Direct pin‑to‑pin replacement for IS200TRPGH1A, no ToolboxST configuration change needed
- High-integrity safety path for overspeed, low lube oil pressure, and emergency trip commands
- Surge protection built-in for robust operation in high-noise turbine cabinets
- Works in TMR 2oo3 protection architecture together with TPRO and PPRO assemblies
- Standard rack form factor for straightforward spare swap during outage maintenance
Typical Applications
- Combined cycle gas turbine emergency shutdown solenoid control
- Steam turbine safety trip circuit termination
- Burner flame detection wiring interface for Mark VIe combustion racks
- Power plant turbine protection system spare replacement
- Oil & gas mechanical drive turbine safety retrofits
Related / Reference Models
- IS200TRPGH1A: Earlier revision
- IS200TPROH1C: TPRO protection terminal board (paired with TRPG)
- IS220PPROH1A / IS220PPROS1B: PPRO protection I/O packs
- IS200TREGH1B: TREG trip reference board, often used alongside TRPG
FAQ
- Is IS200TRPGH1B still in production? It is a legacy Mark VIe safety termination board. New original stock is limited; available supply is new surplus or fully tested refurbished units. Lead time needs stock confirmation.
- What is the difference between TRPG and TPRO? TPRO (IS200TPROH1C) receives MPU speed and PT voltage signals and executes protection logic. TRPG (IS200TRPGH1B) is the output power stage that drives the physical trip solenoids for shutdown.
- Does the suffix DE / CFD mean conformal coating? Suffix variants indicate coated PCB versions for humid, coastal or corrosive cabinet environments; standard IS200TRPGH1B is non-coated. Verify revision against your existing drawing before replacement.




