IS200STTCH2A | GE Simplex Thermocouple Terminal Board (STTC)
Overview
IS200STTCH2A is the STTC Simplex Thermocouple Termination Board for GE Vernova Speedtronic Mark VI / Mark VIe turbine control platforms. It is a dedicated temperature interface board designed to receive thermocouple signals from gas turbines, steam turbines, burners and exhaust sections. The board integrates cold junction compensation (CJC), signal filtering and A/D conversion, transmitting calibrated temperature data to the I/O pack via the rack backplane. It is widely used for exhaust gas temperature monitoring, bearing metal temperature and combustion temperature surveillance, forming an essential thermal monitoring channel for turbine protection and performance calculation.
Core Technical Specifications
| Item | Specification |
|---|---|
| Part Number | IS200STTCH2A |
| Manufacturer | GE Vernova (General Electric / GE Fanuc) |
| Module Type | Simplex Thermocouple Termination Board (STTC) |
| Platform | Speedtronic Mark VI / Mark VIe |
| Sensor Type | Multi-type thermocouple (Type K, E, J, T configurable) |
| Channel Count | 16 thermocouple input channels |
| Built-in Function | Cold Junction Compensation (CJC) |
| Isolation | Channel-to-backplane galvanic isolation |
| Power Supply | 24 V DC |
| Connectors | Screw terminal blocks for field TC wiring; D-Sub to mate with I/O pack |
| Diagnostics | Open thermocouple detection, out-of-range alarm, CJC fault alarm |
| Operating Temperature | -30 ℃ ~ +65 ℃ |
| Storage Temperature | -40 ℃ ~ +85 ℃ |
| Relative Humidity | 5% ~ 95% non-condensing |
| Net Weight | Approx. 0.5 kg |
| Mounting | Standard Mark VI / Mark VIe rack slot |
| Compliance | CE |
| Country of Origin | USA |
Key Features & Benefits
- 16-channel thermocouple acquisition with on-board cold junction compensation for accurate temperature reading
- Supports multiple thermocouple types, configurable via ToolboxST software
- Open-circuit detection function to quickly identify broken thermocouple wiring
- Galvanic isolation suppresses common-mode noise in high EMI turbine cabinets
- Simplex architecture; paired with matching STCP I/O pack for temperature data processing
- Standard rack footprint for direct drop-in spare replacement during outages
- Temperature data participates in turbine over-temperature protection and combustion monitoring logic
- Available with conformal coated variants for humid, coastal or corrosive cabinet environments
Typical Applications
- Gas turbine exhaust temperature monitoring and over-temperature protection
- Steam turbine bearing and casing temperature surveillance
- Combined cycle power plant combustion and flue gas temperature measurement
- Generator auxiliary system thermal monitoring
- Power plant Mark VI / Mark VIe turbine control rack maintenance and spare retrofit
Related / Reference Models
- IS200STTCH1A: Earlier STTC thermocouple board revision
- IS220STCPH1A: Matching STCP thermocouple processor I/O pack
- IS200TTURH1C / IS200TPROH1C: Governor and protection termination boards
- IS200TREGH1B / IS200TRPGH1B: Emergency trip termination boards
FAQ
- Is IS200STTCH2A still in production? It is a legacy Mark VI/Mark VIe thermal termination board. New original stock is limited; available supply is new surplus or fully tested refurbished units. Lead time requires stock confirmation.
- What is the difference between STTC and STCP? STTC (IS200STTCH2A) is the field termination board that conditions TC signals and performs CJC. STCP is the I/O processor pack that receives signals from STTC and communicates over IONet to the controller.
- Can this board be used in TMR redundant temperature loops? This is the simplex STTC board. For TMR 2oo3 redundant temperature voting, three separate STTC + STCP lanes are deployed.




