MOOG G122-829A001 Configurable PI Servo Amplifier, DIN Rail Mount for Electro-Hydraulic Servo Valve, Ready Stock
Product Overview
The G122-829A001 is a compact DIN-rail mounted proportional-integral (P-I) servo amplifier designed to drive MOOG two-stage electro-hydraulic servo valves such as G771K202A / G771K208A. It accepts command and feedback signals, executes PI closed-loop calculation, and outputs drive current to the servo valve torque motor. Users can select P-only, I-only or combined PI mode via internal dip switches. Front-panel potentiometers allow on-site tuning of proportional gain, integral gain, bias and dither. It is widely used in steam turbine DEH governing systems, hydraulic actuator position loops and material test benches.
Technical Parameters
| Item | Specification |
|---|---|
| Part Number | G122-829A001 |
| Manufacturer | MOOG |
| Product Type | P-I Servo Amplifier / Servo Valve Driver |
| Mounting | DIN rail, IP20 |
| Supply Voltage | 24 VDC (22–28 VDC range) |
| Supply Current | 75mA idle; max 200mA @ full valve load |
| Command / Feedback Input | Switch selectable: ±10V differential or 4–20mA |
| Output to Servo Valve | ±15V drive, max 100mA |
| Control Mode | P / I / PI switch selectable |
| Proportional Gain | 1 ~ 20 adjustable |
| Integral Gain | 1 ~ 45 / sec adjustable |
| Dither | Fixed 200Hz, enable/disable selectable |
| Enable Input | 17–32VDC relay enable |
| Operating Temperature | -20 °C ~ +60 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Relative Humidity | 5%–95%, non-condensing |
| Dimension | 100 × 108 × 45 mm |
| Net Weight | Approx. 0.18 kg |
| Country of Origin | Germany |
| Condition | Original genuine, available in stock |
Brand History & Introduction (MOOG G122 Amplifier Lineage)
MOOG’s G122 series modular servo amplifiers were developed to offer a standard off-the-shelf drive solution for industrial servo valves, removing the need for custom analog control circuits. Before this series, servo valve drive electronics were often built into larger controller racks or custom circuit boards, which made spare replacement and tuning difficult.
The G122-829 variant is the general-purpose PI closed-loop version. The suffix A001 denotes its hardware revision. It is extremely common paired with G771 series servo valves in power plant DEH hydraulic cabinets.
While MOOG has released newer digital servo controller families, thousands of existing steam turbine governing loops still rely on this analog DIN amplifier. It remains a high-demand spare for outage maintenance, especially when paired with the G771K202A and G771K208A servo valves we also have in stock.
Key Advantages
- Flexible P / I / PI mode selection to suit different hydraulic loop characteristics
- Supports both ±10V and 4–20mA signal interface, easy integration with DCS
- Built-in adjustable dither signal to reduce valve static friction and stiction
- DIN rail compact form factor, simple cabinet installation and swap-out
- Front panel trimpots for fast on-site loop tuning without software
- Perfect matching driver for MOOG G771 series DEH servo valves
Typical Applications
- Steam turbine DEH hydraulic actuator servo valve drive
- Power plant governing valve closed-loop position control
- Fatigue test rigs and hydraulic force/position test benches
- High precision industrial hydraulic closed-loop control systems
FAQ Snippet
Q: Is -829A001 a servo valve? A: No, it is the amplifier/driver board. It must be used together with a MOOG servo valve like G771K202A / G771K208A.
Q: Can it drive other brands of servo valves? A: It is optimized for MOOG torque motor servo valves; compatibility with other brands must be verified by coil current and impedance parameters.
Q: What is dither for? A: The 200Hz dither prevents the spool from sticking, improving low signal resolution and reducing hysteresis.




