Bently Nevada 3500/50-01-00 133388-02 + 133442-01 2-Channel Tachometer Module Product Introduction
Product Overview
The Bently Nevada 3500/50-01-00 assembly, consisting of the 133388-02 front panel main Tachometer monitoring module and the matching 133442-01 backplane I/O module with integrated internal signal terminations, is a 2-channel dedicated high-precision shaft speed and acceleration monitoring module designed exclusively for the 3500 Machinery Protection System. As the specialized speed protection hardware for critical rotating machinery, it natively accepts input signals from proximity probes or magnetic pickups (MPU) installed on rotating shafts, converting raw pulse signals into accurate real-time shaft rotational speed, rotor acceleration, and rotation direction data, while also providing high-quality Keyphasor timing reference signals to the entire 3500 rack through the backplane bus .
This module pair is fully compliant with API 670 industry machinery protection standards. It integrates advanced pulse signal conditioning, high-precision zero-crossing detection, and independent speed alarm judgment functions. It can independently complete full protection logic for 2 speed measurement points, and seamlessly transmit all speed trend, acceleration data, and alarm status to the 3500/22M TDI or System 1 diagnostic platform. It is the core dedicated speed protection module for critical rotating assets in heavy industrial facilities .
Core Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number Combination | 3500/50-01-00 (133388-02 Front Panel Tachometer + 133442-01 Backplane I/O Module) |
| Number of Independent Channels | 2 fully configurable independent channels |
| Supported Sensor Types | Bently Nevada eddy-current proximity probes, industrial magnetic pickups (MPU) |
| Measurement Parameters | Shaft rotational speed, rotor acceleration, rotation direction, Keyphasor timing reference |
| Maximum Shaft Speed Support | Up to 20,000 RPM |
| Built-In Hysteresis Voltage | 2.5 V, effectively eliminating false alarms caused by minor signal fluctuations |
| Alarm Configuration | 2 independent programmable setpoints (Alert / Danger) per channel, with adjustable delay |
| Analog Output | Buffered 4-20 mA retransmission output per channel, corresponding to full-scale speed range |
| Power Consumption | Typical 6 W, powered via 3500 rack backplane |
| Operating Temperature Range | -20°C to +65°C (-4°F to +149°F) |
| Storage Temperature Range | -40°C to +85°C (-40°F to +185°F) |
| Relative Humidity | 5% to 95% non-condensing |
| Form Factor | Standard 3500 series half-height module |
| Hot Swap Support | Fully supported for online replacement without interrupting other channels |
| Certifications | CE, UL, CSA, Class 1 Division 2 / Zone 2 hazardous area certified |
Key Features
- High-Precision Speed Measurement Performance: The advanced pulse signal conditioning and zero-crossing detection circuit ensure sub-RPM level speed measurement accuracy, even for low-speed heavy-duty rotating machinery. The built-in 2.5 V hysteresis voltage design completely eliminates false speed alarms caused by tiny signal fluctuations or electrical noise in industrial sites, drastically improving measurement reliability .
- Dual-Channel Redundancy Capability: The 2 independent channels can be configured as primary/backup redundant speed inputs for the same shaft. If the primary sensor fails or signal is lost, the system automatically switches to the backup channel without interrupting speed protection, eliminating the common single-point failure risk of traditional single-tachometer designs.
- Built-In Internal Signal Terminations: The 133442-01 backplane module integrates all signal terminal points internally, eliminating the need for external intermediate terminal blocks. This reduces on-site wiring workload and potential signal attenuation points caused by extra interconnections, improving overall system reliability .
- Full Self-Diagnostic Protection: Built-in continuous sensor health monitoring function automatically detects probe open circuit, short circuit, extension cable disconnection, and signal loss faults, and triggers “Sensor Not OK” alarm immediately. The front-panel LED indicators (OK, Bypass, Channel Alarm) provide intuitive visual feedback of operating status for on-site technicians.
- Seamless System Integration: It communicates with other 3500 series modules through the high-speed backplane bus, no extra signal wiring required. It works perfectly with 3500 Configuration Software and System 1 diagnostic platform, supporting Bode plot, polar plot, and full-speed transient data capture for advanced rotor dynamic fault diagnosis .
Installation & Compatibility Notes
- The 133388-02 front panel and 133442-01 backplane I/O module are strictly matched components for the standard 3500/50 Tachometer Module. They cannot be intermixed with I/O modules of other 3500 series monitoring modules, as mismatched hardware will cause pulse signal conditioning failure or backplane communication conflict .
- This half-height module can be installed in any general-purpose slot of the 3500 rack, no fixed slot restriction. When performing hot-swap replacement, confirm that the “Bypass” state of the corresponding channels is activated in the 3500 configuration software in advance, to avoid speed protection loss caused by signal interruption during the replacement process.
- All field speed sensor signal cables must use shielded dedicated industrial twisted-pair cables, and the shielding layer must be single-point grounded at the rack side. Signal cables must be routed separately from high-voltage power cables to avoid EMI interference that causes speed measurement jitter or signal loss.
- This 3500/50-01-00 assembly is fully backward-compatible with all 3500/05 racks, 3500/15 universal AC power supplies, 3500/22M TDI and all other M-series modules, making it the ideal upgrade replacement for legacy tachometer units in existing 3500 system deployments .
Typical Applications
This dedicated tachometer module is widely deployed on critical rotating assets including large steam turbines, centrifugal compressors, gas turbines, generators, and industrial heavy-duty fans across power generation, oil & gas, petrochemical, and heavy industrial facilities. It provides continuous, reliable shaft speed and acceleration protection for these machines, helping operators detect early abnormal overspeed, rapid acceleration, and reverse rotation faults, effectively preventing catastrophic overspeed damage to high-value rotating equipment .




