Bently Nevada 3500/33 149986-01 + 149992-01 16-Channel Relay Output Module Assembly Product Introduction
Product Overview
The Bently Nevada 3500/33 149986-01 + 149992-01 is a complete full-height 16-channel isolated relay output assembly for the 3500 Machinery Protection System, consisting of the 149986-01 front-panel main relay processing module and the matching 149992-01 rear I/O termination unit. As the core hardwired alarm execution hardware of the entire 3500 system, it receives real-time alarm judgment signals from all monitoring modules in the rack through the high-speed backplane bus, and independently drives 16 groups of isolated SPDT relay contacts to output hardwired trip/alarm signals to external plant safety systems, ESD (Emergency Shutdown) systems, local alarm annunciators, and DCS hardwired input points .
This module assembly is fully compliant with API 670 industry machinery protection standards. It integrates independent relay drive circuits, full-channel electrical isolation, built-in arc suppression, and real-time self-diagnostic functions. It is the industry-standard high-density full-height relay output solution for critical rotating assets in heavy industrial facilities that require a large number of hardwired alarm and trip signal outputs.
Core Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number Combination | 3500/33 (149986-01 Front Panel + 149992-01 Rear I/O Module) |
| Module Type | Full-height 16-Channel Isolated Relay Output Module |
| Number of Independent Relay Channels | 16 fully configurable isolated SPDT relay channels |
| Relay Contact Rating | 250 VAC / 30 VDC, 5 A maximum resistive load per channel |
| Electrical Isolation | 250 Vrms channel-to-rack ground isolation, eliminating common-mode interference |
| Arc Suppression | Built-in 250 Vrms arc suppressors as standard for all relay channels |
| Alarm Logic Configuration | Each relay can be freely mapped to any monitoring channel’s Alert/Danger alarm status, or configured as system-level fault/OK status output |
| Operating Temperature Range | -40°C to +70°C (-40°F to +158°F) |
| Storage Temperature Range | -40°C to +85°C (-40°F to +185°F) |
| Relative Humidity | 95% non-condensing |
| Dimensions (H×W×D) | 241 mm × 24.4 mm × 242 mm (9.49 in × 0.96 in × 9.53 in) |
| Form Factor | Standard 3500 series full-height module |
| Hot Swap Support | Fully supported for online replacement without interrupting other channels |
| Certifications | CE, UL, CSA, ATEX, Class 1 Division 2 / Zone 2 hazardous area certified |
Key Features
- High-Density 16-Channel SPDT Output Capability: The 16 independent SPDT relay channels in a single full-height module drastically reduce the number of modules required for large-scale machinery protection systems, maximizing rack space utilization. Each relay provides independent Normally Open (NO) and Normally Closed (NC) contact pairs, supporting both energize-to-trip and de-energize-to-trip safety logic configurations to meet different plant safety system design requirements .
- Full Electrical Isolation & Built-In Arc Suppression: Each relay channel features independent 250 Vrms electrical isolation, completely breaking the electrical connection between the 3500 system internal circuit and the external plant ESD/DCS hardwired loop. The built-in 250 Vrms arc suppressors eliminate contact arcing during high-current switching, drastically extending relay service life and preventing contact welding faults .
- Flexible Alarm Logic Mapping: Each relay channel can be freely configured through the 3500 Configuration Software, supporting single-channel alarm mapping, multi-channel combined alarm logic, system-level fault status output, and watchdog trip functions. Users can customize the alarm output logic according to the specific safety protection requirements of their machinery .
- Full Self-Diagnostic Protection: Built-in continuous relay health monitoring function automatically detects relay coil open circuit, contact abnormal state, and internal power supply faults, and triggers corresponding system fault alarms immediately. The front-panel LED indicators provide intuitive visual feedback of each relay’s operating status for on-site technicians.
- Zero-Interference Safety Architecture: This module operates completely outside the critical machinery protection trip path. All configuration changes or hot-swap replacement operations will never interfere with the normal protection logic of other 3500 monitoring modules, ensuring zero risk of unintended machine trips during maintenance.
Installation & Compatibility Notes
- This full-height module occupies one full-height front slot plus the matching dedicated rear I/O slot in the 3500/05 rack. All relay wiring terminals are located on the 149992-01 rear I/O module, no external terminal blocks are required .
- All external relay output trip signal cables must be routed separately from analog vibration sensor signal cables to avoid electrical interference that causes false alarms. The module is a static-sensitive assembly, technicians must use a grounded anti-static wrist strap during installation and maintenance .
- For SIL-rated safety trip circuit applications, you must verify that the module’s current functional safety certificate and voltage limits fully match your plant safety case. Do not assume 250 VAC rating is automatically permitted for all SIL safety loops .
- This 3500/33 149986-01 + 149992-01 assembly is fully backward-compatible with all 3500/05 racks, 3500/15 universal AC power supplies, 3500/22M TDI and all other M-series modules, making it the ideal direct drop-in replacement for legacy full-height relay output units in existing 3500 system deployments.
Typical Applications
This 16-channel full-height relay output module is widely deployed on critical rotating assets including large steam turbines, centrifugal compressors, gas turbines, generators, and high-speed reciprocating compressors across power generation, oil & gas, petrochemical, and heavy industrial facilities. It provides a large number of reliable hardwired alarm and trip signals for plant ESD safety systems, local control panels, and DCS hardwired input loops, ensuring that all critical machinery protection alarm signals can be reliably transmitted to the plant safety system through hardwired paths, effectively preventing unplanned downtime and catastrophic equipment damage caused by machinery faults .




