Bently Nevada 3500/33-01-00 16-Channel Relay Output Module Product Introduction
Product Overview
The Bently Nevada 3500/33-01-00 is a dedicated 16-channel relay output module designed exclusively for the 3500 Machinery Protection System. As the core hardwired alarm execution hardware of the entire 3500 system, it receives real-time alarm judgment signals from all monitoring modules in the rack through the high-speed backplane bus, and independently drives 16 groups of isolated relay contacts to output hardwired trip/alarm signals to external plant safety systems, ESD (Emergency Shutdown) systems, local alarm annunciators, and DCS hardwired input points.
This module is fully compliant with API 670 industry machinery protection standards. It integrates independent relay drive circuits, full-channel electrical isolation, and real-time self-diagnostic functions. It is the industry-standard high-density relay output solution for critical rotating assets in heavy industrial facilities that require a large number of hardwired alarm and trip signal outputs.
Core Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number | 3500/33-01-00 |
| Module Type | 16-Channel Isolated Relay Output Module |
| Number of Independent Relay Channels | 16 fully configurable isolated relay channels |
| Relay Contact Rating | 250 VAC / 30 VDC, 5 A maximum resistive load per channel |
| Electrical Isolation | 250 Vrms channel-to-rack ground isolation, eliminating common-mode interference |
| Alarm Logic Configuration | Each relay can be freely mapped to any monitoring channel’s Alert/Danger alarm status, or configured as system-level fault/OK status output |
| Operating Temperature Range | -40°C to +70°C (-40°F to +158°F) |
| Storage Temperature Range | -40°C to +85°C (-40°F to +185°F) |
| Relative Humidity | 95% non-condensing |
| Form Factor | Standard 3500 series half-height module |
| Hot Swap Support | Fully supported for online replacement without interrupting other channels |
| Certifications | CE, UL, CSA, ATEX, Class 1 Division 2 / Zone 2 hazardous area certified |
Key Features
- High-Density 16-Channel Output Capability: The 16 independent relay channels in a single half-height module drastically reduce the number of modules required for large-scale machinery protection systems, maximizing rack space utilization. It can simultaneously output hardwired alarm signals for multiple vibration, position, speed, and process parameter monitoring points, eliminating the need for extra external relay expansion cabinets.
- Full Electrical Isolation Design: Each relay channel features independent 250 Vrms electrical isolation, completely breaking the electrical connection between the 3500 system internal circuit and the external plant ESD/DCS hardwired loop. This prevents external high-voltage surge signals from damaging the 3500 monitoring system, and also avoids the risk of system signal interference caused by external loop faults.
- Flexible Alarm Logic Mapping: Each relay channel can be freely configured through the 3500 Configuration Software, supporting single-channel alarm mapping, multi-channel combined alarm logic, system-level fault status output, and watchdog trip functions. Users can customize the alarm output logic according to the specific safety protection requirements of their machinery.
- Full Self-Diagnostic Protection: Built-in continuous relay health monitoring function automatically detects relay coil open circuit, contact abnormal state, and internal power supply faults, and triggers corresponding system fault alarms immediately. The front-panel LED indicators provide intuitive visual feedback of each relay’s operating status for on-site technicians.
- Zero-Interference Safety Architecture: This module operates completely outside the critical machinery protection trip path. All configuration changes or hot-swap replacement operations will never interfere with the normal protection logic of other 3500 monitoring modules, ensuring zero risk of unintended machine trips during maintenance.
Installation & Compatibility Notes
- This half-height module can be installed in any general-purpose slot of the 3500 rack, no fixed slot restriction. When performing hot-swap replacement, confirm that the “Bypass” state of the corresponding relay channels is activated in the 3500 configuration software in advance, to avoid false trip signals caused by contact state interruption during the replacement process.
- All external relay output signal cables must use shielded industrial-grade twisted-pair cables, and the shielding layer must be single-point grounded at the external safety system side. Signal cables must be routed separately from high-voltage power cables to avoid EMI interference that causes relay contact misoperation.
- This 3500/33-01-00 module is fully backward-compatible with all 3500/05 racks, 3500/15 universal AC power supplies, 3500/22M TDI and all other M-series modules, making it the ideal upgrade replacement for legacy relay output units in existing 3500 system deployments.
Typical Applications
This 16-channel relay output module is widely deployed on critical rotating assets including large steam turbines, centrifugal compressors, gas turbines, generators, and high-speed reciprocating compressors across power generation, oil & gas, petrochemical, and heavy industrial facilities. It provides a large number of reliable hardwired alarm and trip signals for plant ESD safety systems, local control panels, and DCS hardwired input loops, ensuring that all critical machinery protection alarm signals can be reliably transmitted to the plant safety system through hardwired paths, effectively preventing unplanned downtime and catastrophic equipment damage caused by machinery faults.




