Bently Nevada 3500/15-05-05-00 106M1079-01 + 106M1081-01 Universal AC Power Supply Product Introduction
Product Overview
The Bently Nevada 3500/15-05-05-00 assembly, consisting of the 106M1079-01 front panel power supply module and the matching 106M1081-01 backplane Power Input Module (PIM), is a half-height universal AC power supply designed exclusively for the left-side slots of the 3500 Machinery Protection System rack. As the primary energy source for the entire 3500 system, it converts wide-range industrial AC mains voltage into stable, regulated DC voltages required by all monitoring, communication, and relay modules within the rack .
This module pair supports full 1:1 redundancy configuration, allowing two identical power supplies to be installed in parallel. In a redundant setup, either supply can independently power the entire rack load, and hot-swap replacement is fully supported without interrupting system operation or triggering false alarms. It is the standard, most widely deployed power solution for 3500 racks in global industrial facilities, ensuring continuous, reliable operation of critical machinery protection systems across power generation, oil & gas, and heavy manufacturing sectors .
Core Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number Combination | 3500/15-05-05-00 (106M1079-01 Front Panel PSU + 106M1081-01 Backplane PIM) |
| Module Type | Half-height Universal AC Power Supply |
| Input Voltage Range | 85 to 264 VAC RMS (Universal AC) |
| Input Frequency | 47 to 63 Hz |
| Maximum Input Current | Up to 2.8 A RMS at minimum input voltage |
| Output Voltages | +5 VDC, +12 VDC, -12 VDC, +24 VDC (regulated via 3500 backplane distribution) |
| Redundancy Support | Full 1:1 primary/backup redundancy; hot-swappable when dual supplies are installed |
| Minimum Rack Load | No minimum load required for stable operation |
| Power Consumption | Self-consumption typical < 15 W under normal rack load conditions |
| Operating Temperature Range | -30°C to +65°C (-22°F to +150°F) |
| Storage Temperature Range | -40°C to +85°C (-40°F to +185°F) |
| Relative Humidity | 5% to 95% non-condensing |
| Dimensions | 251.5 mm (L) × 50.8 mm (W) × 120.7 mm (H) |
| Weight | ~1.39 kg (3.06 lbs) |
| Installation Position | Leftmost half-height slots of the 3500 rack (Slots 1 and 2 from left, adjacent to frame ground) |
| Certifications | CE, UL, CSA, ATEX, Class 1 Division 2 / Zone 2 hazardous area certified |
Key Features
- Universal Wide-Range AC Input: Accepts any standard global AC mains voltage from 85 VAC to 264 VAC at 47-63 Hz, eliminating the need for external voltage transformers or region-specific power supply variants. This makes the 3500/15-05-05-00 the ideal single spare part for multinational facilities with mixed voltage infrastructure .
- Full Hot-Swap Redundancy Architecture: When two 3500/15 power supplies are installed, they operate in parallel redundancy mode. If one supply fails or is removed for maintenance, the second supply instantly takes over the full rack load without any voltage dip or system interruption. Front-panel LEDs clearly indicate OK, Fault, and Active status for immediate visual diagnostics .
- Comprehensive Electrical Protection: Built-in under-voltage, over-voltage, and over-current protection circuits automatically isolate the power supply from the rack bus if abnormal conditions are detected, preventing damage to sensitive monitoring modules. The out-of-range protection ensures that neither the PSU nor the PIM is harmed by transient grid fluctuations .
- No Minimum Load Requirement: Unlike some legacy linear power supplies, this switched-mode design operates stably even with very light rack loads, making it suitable for small-scale 3500 deployments with only a few monitoring modules without requiring dummy load resistors .
- Rugged Industrial Design: The half-height form factor maximizes rack space efficiency while maintaining robust thermal management. The wide operating temperature range and conformal-coated internal circuitry ensure reliable long-term performance in harsh industrial environments with high humidity, vibration, and electrical noise .
Installation & Compatibility Notes
- The 106M1079-01 front panel and 106M1081-01 backplane PIM are strictly matched components for the universal AC version of the 3500/15 power supply. They cannot be intermixed with high-voltage DC (129486-01 + 129478-01) or low-voltage DC PIMs, as mismatched hardware will cause immediate power failure or permanent damage to the rack backplane .
- This half-height module must be installed in the leftmost slots of the 3500 rack. For redundant configurations, install two identical 3500/15-05-05-00 assemblies in the two leftmost half-height slots. Never mix different power supply types (e.g., AC and DC) in a redundant pair .
- Always ensure the rack frame ground is properly connected before powering on the system. Use shielded AC power cables with proper grounding conductors, and route power cables separately from sensitive sensor signal cables to avoid EMI coupling into measurement channels .
- This 3500/15-05-05-00 assembly is fully backward-compatible with all legacy 3500/05 racks and forward-compatible with all current-generation 3500 M-series monitoring modules, 3500/22M TDI, and 3500/92 communication gateways, making it the universal drop-in replacement for any failed AC power supply in existing 3500 installations .
Typical Applications
This universal AC power supply is the foundational power source for virtually all Bently Nevada 3500 Machinery Protection Systems deployed globally. It powers critical rotating asset monitoring racks in power plants (steam/gas turbines, generators), oil & gas facilities (centrifugal/reciprocating compressors, pumps), petrochemical refineries, steel mills, and heavy industrial manufacturing sites. Its universal voltage acceptance and hot-swap redundancy make it the preferred choice for ensuring uninterrupted protection of high-value machinery across diverse global infrastructure projects .




