Bently Nevada 176449-02 3500/42M 4-Channel Proximitor/Seismic Monitor Product Introduction
Product Overview
The Bently Nevada 176449-02 is the front-panel main processing unit of the 3500/42M 4-Channel Proximitor/Seismic Monitor in the 3500 Machinery Protection System. As the core high-performance vibration and position measurement processing module, it natively accepts input signals from non-contact Proximitor displacement probes, velocity sensors, and accelerometers, performing high-precision 24-bit AD conversion, real-time signal analysis, and independent alarm judgment for 4 independent channels. It is purpose-built to provide continuous, reliable machinery protection monitoring for critical rotating assets in heavy industrial facilities .
This module is fully compliant with API 670 industry machinery protection standards. It supports multiple measurement functions including radial shaft vibration, thrust position, differential expansion, eccentricity, REBAM, and seismic vibration, making it the industry-standard multi-application vibration monitoring solution for large steam turbines, centrifugal compressors, and gas turbines.
Core Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number | 176449-02 |
| Product Model | 3500/42M 4-Channel Proximitor/Seismic Monitor |
| Number of Independent Channels | 4 independent channels (paired configuration: Ch 1/2 and Ch 3/4) |
| Supported Sensor Types | Non-contact Proximitor displacement probes, velocity sensors, accelerometers |
| Measurement Functions | Radial vibration, thrust position, differential expansion, eccentricity, REBAM, seismic vibration |
| Resolution | 24-bit high-precision AD conversion |
| Maximum Sampling Rate | Up to 102.4 kHz per channel |
| Frequency Response | 0.1 Hz to 10 kHz (-3 dB) |
| Alarm Configuration | 2 programmable thresholds per channel (Alert/Danger) with 0–60 s adjustable delay |
| Analog Output | 4–20 mA proportional output per channel |
| Power Consumption | 7.7 W typical operating power |
| Input Impedance | 10 kΩ for Proximitor and acceleration inputs |
| Operating Temperature Range | -30°C to +65°C (-22°F to +149°F) |
| Form Factor | Standard 3500 series full-height plug-in module |
| Hot Swap Support | Fully supported for online replacement without interrupting other channels |
| Certifications | CE, UL, CSA, ATEX, Class 1 Division 2 / Zone 2 hazardous area certified |
Key Features
- Multi-Sensor Native Compatibility: The module natively supports three mainstream industrial sensor types (Proximitor, velocity, acceleration) without requiring extra external signal conversion hardware. Users can freely configure each channel to match different sensor types, realizing comprehensive measurement of shaft displacement and casing vibration in a single module.
- Ultra-High Performance Signal Processing: With 24-bit high-resolution AD conversion, up to 102.4 kHz high-speed sampling rate, and 0.1 Hz to 10 kHz wide frequency response, it can accurately capture both low-speed slow-changing shaft position signals and high-frequency casing vibration signals, meeting the full-bandwidth monitoring requirements of different types of rotating machinery.
- Flexible Paired Channel Configuration: The 4 channels are divided into two independent paired groups (Ch 1/2 and Ch 3/4), supporting advanced combined measurement functions such as differential expansion and eccentricity that require two channels to work synchronously. This greatly expands the module’s application scenarios without occupying extra rack slots.
- Full Self-Diagnostic Protection: The module continuously monitors sensor health, signal integrity, and internal operating status in real time, automatically detecting sensor open circuit, short circuit, and signal out-of-range faults, and triggering “Sensor Not OK” alarms immediately. The front-panel LED indicators provide intuitive visual feedback of each channel’s operating status for on-site technicians.
- Zero-Interference Safety Architecture: This module operates completely outside the critical machinery protection trip path. All configuration changes or hot-swap replacement operations will never interfere with the normal protection logic of other 3500 monitoring modules, ensuring zero risk of unintended machine trips during maintenance.
Installation & Compatibility Notes
- This front-panel main processing module must be paired with a matching dedicated rear I/O module to form a complete functional monitoring unit. It cannot work independently without the corresponding rear I/O module installed in the rack.
- The module is shipped unconfigured from the factory. You must insert it into the 3500 rack and use the official 3500 Rack Configuration Software to complete sensor type selection, measurement scaling, and alarm setpoint configuration before restoring field sensor inputs. Incorrect configuration will result in inaccurate measurement readings.
- This 176449-02 module is fully backward-compatible with all 3500/05 racks, 3500/15 universal AC power supplies, 3500/22M TDI and all other M-series modules, making it the ideal direct drop-in replacement for legacy 3500/42M main processing units in existing 3500 system deployments.
Typical Applications
This multi-application Proximitor/Seismic monitor module is widely deployed on critical rotating assets including large steam turbines, centrifugal compressors, gas turbines, generators, and high-speed pumps across power generation, oil & gas, petrochemical, and heavy industrial facilities. It acts as the primary vibration and position monitoring core for the unit’s TSI system, tracking key parameters such as radial shaft vibration, thrust position, differential expansion, and casing absolute vibration, helping operators detect early rotor unbalance, misalignment, oil whirl, and bearing wear faults, effectively preventing unplanned downtime and catastrophic equipment damage.




