8201-HI-IS | MTL (Eaton) PAC8000 8-Channel Intrinsically Safe Analog Input Module
Brand Label
Brand: MTL (Eaton) Part No.: 8201-HI-IS Product Name: 8-channel Intrinsically Safe 4–20 mA Analog Input Module with HART Series: PAC8000 Remote I/O Origin: United Kingdom Compliance: ATEX, IECEx, CSA, CE, SIL capable Status: Obsolete / End-of-Life, critical spare for hazardous-area DCS retrofit Function: IS analog input card for 2-wire HART transmitters, mounts on PAC8000 Railbus carrier
Technical Specifications
| Item | Parameter |
|---|---|
| Channel Count | 8 single-ended analog input channels |
| Signal Range | 4–20 mA, extended 0.5–22 mA |
| Resolution | 16-bit |
| Conversion Time | 33 ms per channel; HART response ~0.75 s |
| Transmitter Supply | Min. 15 V @ 20 mA (built-in loop power) |
| Accuracy @ 25°C | ±20 μA |
| Temperature Stability | ±0.006% of span / °C (-40 °C ~ +70 °C) |
| Fault Detection | Open circuit (<0.5 mA), short circuit (>21.5 mA) |
| Isolation | Channel-to-Railbus: 60 V AC; no inter-channel isolation |
| Module Key Code | A1 |
| Power Consumption | 600 mA |
| Net Weight | 260 g |
| Mounting | Clips onto PAC8000 8710-CA series carrier backplane |
| Application | Zone 0 / Div.1 hazardous locations: offshore, refinery, petrochemical, chemical plant HART instrument monitoring |
Key Features & Advantages
- Intrinsically safe design for direct connection to 2-wire HART transmitters in Zone 0 explosive areas
- Native HART pass-through, supports remote calibration, HART variable reading and diagnostic status reporting
- Integrated loop power supply for field transmitters, eliminating separate barrier power wiring
- Built-in line fault detection for open/short circuit alarm reporting to host DCS
- Software configurable high / high-high / low / low-low process alarms and filter time constants
- Mechanical key-lock mechanism prevents mismatched I/O insertion to preserve safety integrity
- Seamless Railbus communication with EBIM gateway (8521-EB-MT) for Modbus TCP host connectivity
- Compact hot-swappable module design for live cabinet maintenance without full system shutdown
Recommended 6 Related / Alternative Models
- 8202-HI-IS – 8-channel IS analog output module, PAC8000
- 8710-CA-04 – 4-slot PAC8000 Railbus carrier (matching rack)
- 8710-CA-08 – 8-slot Railbus carrier
- 8521-EB-MT – MOST Ethernet Bus Interface Module (EBIM gateway, your previous inquiry)
- 8701-PS – Railbus power supply
- MTL6000 AI Module – Modern intrinsically safe analog input for new greenfield projects
Brand & I/O Brief History
MTL Instruments, founded in 1971 in the UK, built its reputation for intrinsic safety barriers and hazardous-area signal conditioning, later acquired by Eaton.
The distributed remote I/O platform was developed around the proprietary Railbus backplane architecture, delivering intrinsically safe I/O for oil, gas and refining sites. The 8201-HI-IS is one of the most widely deployed AI cards in this family, designed specifically for 4–20 mA HART transmitters.
Eaton discontinued new manufacturing for the entire portfolio. While new builds now migrate to the MTL6000 platform, the 8201-HI-IS remains a high-demand spare for the massive global installed base.
FAQ
- Can 8201-HI-IS work with non-HART 4-20mA transmitters? Yes, standard analog signals operate normally; HART functions simply remain unused.
- Can I hot-swap this module online? Yes, hot-swap is supported on the Railbus system, but follow site hazardous-area permit procedures.
- Does it come with field terminal block? The module itself does not include terminals; dedicated snap-on field terminals are ordered separately.




