3500/44M-01-00 | Bently Nevada (Baker Hughes) Aeroderivative Gas Turbine Vibration Monitor
Brand Label
Brand: Bently Nevada (Baker Hughes) Part No.: 3500/44M-01-00 Product Name: 4-Channel Aero-Derivative Gas Turbine Seismic Vibration Monitor Series: 3500 TSI Machinery Protection Rack System Origin: USA Compliance: SIL 2 capable, CE, hazardous area approvals available Status: Active / supported core TSI module, widely used for aeroderivative gas turbine protection Function: Specialized seismic vibration monitor designed for aeroderivative gas turbines; accepts accelerometer / Velomitor inputs, provides 1X tracking filter, band-pass vibration measurement, alarm & trip protection, supports Keyphasor speed referenceBaker Hugh…
Technical Specifications
| Item | Parameter |
|---|---|
| Channel Count | 4 independent seismic vibration channels |
| Supported Sensors | Velomitor velocity transducers, accelerometers |
| Keyphasor Input | Dual Keyphasor inputs for tracking filter reference |
| Measurement Types | 1X synchronous vibration, band-pass filtered vibration, acceleration / velocity integration |
| Update Rate | ≤100 ms |
| Power Consumption | Typical 7.7 W |
| Form Factor | Single-slot front module, matched rear I/O terminal base |
| Operating Temperature | -30 °C ~ +65 °C |
| Humidity | 95% non-condensing |
| Hot Swap | Supported within 3500 rack architecture |
| Software | Configured via 3500 Rack Configuration Software; data viewable in System 1 |
| Application | Aeroderivative gas turbines (PGT25, LM series etc.), mechanical drive, power generation, turbine vibration protection, paired with Mark VIe, VM600, HIMA SIS, FGS systems |
Key Features & Advantages
- Purpose-built for high-frequency vibration characteristics of aeroderivative gas turbines, different from general-purpose 3500/42M monitorBaker Hugh…
- Each channel pair can use separate Keyphasor sources for flexible 1X tracking
- Onboard signal integration: convert acceleration signal to velocity for turbine casing vibration monitoring
- Full continuous sensor, circuit and signal diagnostics, OK / Not OK fault reporting
- Configurable Alert (alarm) and Danger (trip) setpoints for machinery protection
- Seamless communication across 3500 rack backplane, compatible with 3500/32M relay modules, communication gateways
- Proven OEM acceptance for Rolls-Royce, GE aeroderivative turbine packages
- SIL2 capable when implemented within approved safety loop design
Recommended 6 Related / Alternative Models
- 3500/42M – General-purpose 4-channel proximitor / seismic monitor (standard shaft vibration & position)
- 3500/32M – 4-channel relay output module for alarm/trip contact outputs
- 3500/25M – Keyphasor module for speed and phase reference
- 3500/92 – Communication gateway (Modbus TCP / OPC)
- 3500/44 – Older generation Aero GT monitor (internal terminal version, predecessor)
- 3500/50M – Tachometer / speed monitor
Brand & Platform Brief History
Bently Nevada 3500 is the industry-standard TSI machinery protection rack for critical rotating equipment. The 3500/44M is the dedicated aeroderivative gas turbine vibration card, optimized for casing and high-frequency blade-path related vibration monitoring, where standard 42M is less suitableBaker Hugh….
This module is very common on GE PGT25, LM aeroderivative gas turbine compressor skids, often integrated together with flame detectors, Mark VIe turbine controls and HIMA SIS ESD systems. Baker Hughes continues to supply and support this module.




