3500/25-01-03-00 149369-01+125800-01 Product Introduction
Product Overview
The 3500/25-01-03-00 149369-01+125800-01 is a dedicated Keyphasor®/I/O Module from Bently Nevada (Baker Hughes), belonging to the globally recognized 3500 Series Machinery Protection System . This complete assembly consists of the main processing unit (part number 149369-01) and the corresponding signal conditioning I/O backplane (part number 125800-01). It is purpose-built to capture high-precision rotational speed, phase reference and 1X/revolution timing signals for large-scale rotating equipment, serving as the critical timing reference for vibration analysis, order tracking and rotor dynamic balancing in industrial machinery protection systems .
Core Technical Specifications
| Parameter Category | Detailed Specifications |
|---|---|
| Manufacturer | Bently Nevada (Baker Hughes) |
| Product Series | 3500 Series Machinery Protection System |
| Assembly Composition | 3500/25 main Keyphasor module (149369-01) + dedicated signal conditioning backplane (125800-01) |
| Total Input Channels | 2 independent Keyphasor input channels |
| Supported Sensor Types | Bently Nevada 3300/3300 XL series eddy current Keyphasor probes, magnetic pickups, Hall effect speed sensors |
| Maximum Input Frequency | 20 kHz, supporting maximum rotational speed up to 300,000 rpm |
| Phase Measurement Accuracy | ±0.1° at 60 Hz, timestamp resolution ≤ 1 μs |
| Input Sensitivity | 0.5 V peak to 24 V peak, with adjustable trigger level |
| Output Signals | Buffered Keyphasor BNC outputs, TTL level reference pulse outputs for external analyzers |
| Communication Interface | 3500 rack backplane communication, fully compatible with 3500 Rack Configuration Software and System 1 condition monitoring platform |
| Power Supply | Powered directly by the 3500 system rack backplane (±15 V DC), typical power consumption 6.8 W |
| Installation | Occupies 1 full slot in the standard 3500 19-inch rack |
| Operating Temperature | -40°C to +70°C |
| Protection Rating | IP20 (for control cabinet installation) |
| Safety Certification | SIL 2 safety integrity level compliant |
| Total Weight | Approximately 0.85 kg |
Key Features and Advantages
- Dual-Channel Redundant Design: The 2 independent Keyphasor input channels support dual-sensor redundant configuration, ensuring continuous phase reference signal output even if one sensor fails, eliminating single-point failure risk for critical equipment.
- Ultra-High Timing Precision: The 1 μs timestamp resolution and ±0.1° phase measurement accuracy provide reliable reference for precise order analysis, rotor dynamic balancing and shaft centerline orbit visualization, which is impossible to achieve with general-purpose vibration monitoring modules.
- Wide Frequency Adaptation Range: The 20 kHz maximum input frequency supports ultra-high-speed turbo-expanders and micro gas turbines, covering almost all industrial rotating equipment speed ranges from 10 rpm to 300,000 rpm.
- Flexible Signal Conditioning: The adjustable trigger level and built-in signal filtering function automatically adapt to different sensor output characteristics, effectively eliminating electromagnetic interference and signal distortion in complex industrial field environments.
- Hot-Swap Support: Supports online hot replacement without system shutdown. The module automatically completes signal re-identification and calibration within 3 seconds after insertion, ensuring no interruption of phase reference data during maintenance.
- Full Ecosystem Compatibility: Natively integrates with all 3500 series monitor modules, 3500/22M TDI transient data interface and System 1 software, providing complete phase-synchronized vibration waveform and order analysis data for predictive maintenance.
Compatible Bently Nevada Reference Models
For system configuration expansion, performance upgrade or spare part selection within the 3500 ecosystem, the following Bently Nevada modules are fully compatible with this assembly:
- 3500/25 149369-02: Upgraded Keyphasor main module variant, with enhanced high-frequency signal processing capability
- 125800-02: Updated version of the 3500/25 signal conditioning backplane, supporting higher sensor input voltage range
- 3500/42-04-00: 4-channel vibration monitor module, which relies on the Keyphasor signal for phase-locked vibration analysis
- 3500/22M 146031-02: Transient Data Interface (TDI) module, for phase-synchronized high-speed waveform data acquisition
- 330103-00-12-10-02-05: Bently Nevada standard 8mm eddy current Keyphasor probe, perfectly matched for signal input
- 3500/15: Redundant power supply module, providing stable ±15V DC power for the entire rack
- 3500/33: Relay output module, for independent alarm output of Keyphasor signal loss fault
- System 1 Software: Bently Nevada enterprise condition monitoring platform, for phase-related vibration data analysis and fault diagnosis
Installation & Operation Guidelines
- Confirm that the 3500 system rack firmware version is compatible with this assembly before installation, and verify that the Keyphasor probe wiring specifications match the 125800-01 backplane terminal definitions.
- Insert the complete assembly into an empty slot on the de-energized 3500 rack, ensuring the backplane gold fingers are fully and securely connected, and lock the module fixing screws.
- Strictly separate Keyphasor signal cables from high-power power cables during wiring, and complete reliable single-point grounding for the shield layer to eliminate electromagnetic interference.
- Use the official 3500 Rack Configuration Software to complete channel parameter configuration, set trigger level, pulse width and signal loss alarm thresholds, and perform field signal verification with a portable signal generator.
- During daily operation, regularly check the module status LED indicators, the gap voltage of Keyphasor probes and the signal quality, and perform periodic calibration according to the Bently Nevada maintenance manual to ensure long-term measurement accuracy.
Typical Application Scenarios
This assembly is widely deployed in critical industrial scenarios for large rotating equipment phase reference monitoring:
- Power Generation: Steam turbine, gas turbine and generator set phase reference, supporting shaft vibration order analysis and thermal bow fault diagnosis
- Petrochemical Industry: Centrifugal compressor and turbo-expander rotational speed monitoring, providing timing reference for surge detection and rotor dynamic balancing
- Air Separation Industry: Large air compressor and expander unit phase synchronization, ensuring accurate orbit visualization and vibration fault diagnosis
- Metallurgy & Steel: Large rolling mill main drive shaft speed and phase monitoring, supporting torsional vibration analysis and equipment fault early warning
- Aerospace Test Stands: High-speed turbine test bench ultra-high-speed rotational speed measurement, providing precise timing reference for performance testing




